upload
Armstrong World Industries
Branża: Construction
Number of terms: 2218
Number of blossaries: 0
Company Profile:
The bottom layer of the floor covering. This is the part of the flooring which determines what adhesive will be used for installation over various substrates.
Industry:Construction
A self-contained, single- or multiple-disc floor machine that dispenses cleaning solution, scrubs the floor and takes up the spent solution in a single operation, leaving the floor clean and dry. Available in a variety of sizes, automatic floor machines can be equipped with either brushes or pads.
Industry:Construction
a.) Sets testing standards for a variety of materials including resilient flooring. b.) American Standard Testing Methods
Industry:Construction
A 15lb asphalt felt paper that meets ASTM Standard D 4869 or 30/30/30 Asphalt laminated Kraft paper that meets federal specification UU-13-790A commonly used to retard moisture.
Industry:Construction
A specially formulated solvent to remove Armstrong Adhesive 57. Available in one quart sizes only.
Industry:Construction
A high solids, high strength urethane adhesive with no water. Used to install Armstrong hardwood flooring products except foam-tile. Various trowels are used for different flooring products. Available in 3 1/2 gallon sizes only.
Industry:Construction
A water-based solution or a solution containing water.
Industry:Construction
A moisture-resistant Armstrong felt backing that allows sheet flooring to be installed on all grade levels.
Industry:Construction
Laminate locking system where each piece aligns automatically making installation easy and features a locking strength of 670 pounds per linear foot.
Industry:Construction
Associated with partially cured finishes. When an applicator is drawn across the surface of half-set finish, especially when applying a new section of finish, the lapped area is deglossed leaving a streak. Usually caused by thin films, which have faster curing times than the surrounding area. May also be caused by inadequate agitation of satin and semi-gloss finishes, which allows "settling" of glossing agents.
Industry:Construction