The human visual system has much less acuity for spatial variation of colour than for brightness. Rather than conveying RGB, it is advantageous to convey luma in one channel, and colour information that has had luma removed in the two other channels. In an analog system, the two colour channels can have less bandwidth, typically one-third that of luma. In a digital system each of the two colour channels can have considerably less data rate (or data capacity) than luma. Green dominates the luma channel: about 59% of the luma signal comprises green information. Therefore it is sensible, and advantageous for signal-to-noise reasons, to base the two colour channels on blue and 1red. The simplest way to remove luma from each of these is to subtract it to form the difference between a primary colour and luma. Hence, the basic video colour-difference pair is (B-Y), (R-Y) (pronounced "B minus Y, R minus Y"). The (B-Y) signal reaches its extreme values at blue (R=0, G=0, B=1; Y=0.114; B-Y=+0.886) and at yellow (R=1, G=1, B=0; Y=0.886; B-Y=-0.886). Similarly, the extrema of (R-Y), +-0.701, occur at red and cyan. These are inconvenient values for both digital and analog systems. The colour spaces YPbPr, YCbCr, PhotoYCC and YUV are simply scaled versions of (Y, B-Y, R-Y) that place the extrema of the colour difference channels at more convenient values.